Not subject to Table 9.3.5.3.2 (a & b)
9.3.5.4.1 - Space to max of 80’
9.3.5.4.3 - The last brace shall be no more than 40’ from the end of the pipe
www.firebyknight.com
Subscribe to:
Post Comments (Atom)
Fire Sprinkler Design and Fire Sprinkler Layout
Search This Blog
Followers
Blog Archive
-
▼
2012
(28)
-
▼
March
(25)
- Scaling objects in a CAD environment
- Fire Sprinkler Design info for Air Compressors
- WET-PIPE PROCEDURES Part 4
- WET-PIPE PROCEDURES Part 3
- WET-PIPE PROCEDURES Part 2
- WET-PIPE PROCEDURES Part 1
- DRY-PIPE PROCEDURES Part 3
- DRY-PIPE PROCEDURES Part 2
- DRY-PIPE PROCEDURES Part 1
- DRY AUXILLARY DRUM-DRIP DRAINAGE PROCEDURES
- Figuring Pressure / K Factor / GPM
- Specific Gravity
- Safety Pressure Remaining
- Volume of Water Per Foot of Pipe
- Dedicated Electrical Space
- Engineering vs Design Part 3
- Engineering vs Design Part 2
- Engineering vs Design
- DETERMINE WHAT BRACE ANGLE AND FIGURE WILL BE USED
- MAXIMUM HORIZONTAL LOADS
- Longitudinal Sway Bracing
- LATERAL SWAY BRACING PART 2
- LATERAL SWAY BRACING
- Structural Components & Sway Bracing
- NFPA 13 UG STUB-IN
-
▼
March
(25)
No comments:
Post a Comment